There will be walls that are surveyed from two rooms from both sides, but they represent the same wall. To prevent them represented doubled there is a function, which can help you identify these two sides of the same wall. The function automatically sets the real wall thickness based on the measured data in the current room and the wall to be a reference line only in the other room. If the lengths of the two sides of the same wall don’t match, then OrthoGraph Architect will automatically split the longer wall into parts. Through this function a difficult house plan can very simply cleared with all measurements and details.
To match the two sides of the same wall simply tap the screen inside the current room and move your finger above the two walls to the outside room.